Step 1: Layout & Mark-Out

template provided and mark hole. Layout: The fence should be a minimum 2’ off the pool edge.
Step 2:Understanding How to Drill

Angle & Level Holes: Before drilling you need to survey all the holes and mark the direction in which the holes will be drilled, should it be a Light Lean Angle, Heavy Lean Angle or a Level Hole? Should the pole lean toward the pool or away from the pool or be level? See diagram below. Mark an arrow on the deck surface to avoid making a mistake. Angles are needed to ensure proper tension and aesthetics.
Step 3:Drilling and Inserting Ground Sleeves
Step 4: Making Your Custom Cut
Cut Screws face away from the pool. This is the panel where the cut will be Screws face away from the pool

Step 5: Finishing & Latching Your POOL FENCE LANDY
Latching the fence: You now have all the full sections installed and the custom cut made as well. Each full section has a pilot hole at the top between the rst and second screw.

CHECK THEVIDEO INSTRUCTIONS!